|Home||» Products||» Auto Repair Tools||» 10 pcs Glow Plug Removal Remover Extraction Tool Kit|
10 pcs Glow Plug Removal Remover Extraction Tool Kit
Operation steps for reference:
Select suitable controller with the same thread as the glow plug and associated drill. Take the controller onto the drill, and screw the controller into the glow plug hole. Carefully drill a hole in the glow plug element. And notice the drilling depth. Unscrew the controller and replace the drill with the corresponding threaded pin for suitable drill diameter. Screw in the guide with the tap to a depth equal to the depth of the hole or the length on the thread bar. Unscrew the guide and threaded pin then replace threaded rod with thread bar.
Replace the controller and carefully tighten the threaded rod tip into the hole of the glow plug as deep as it goes.Gently screw the threaded rod to the glow plug and pull out and detach from the hole.